1987 Austin Mini 1000 City E

Headlamp aim too low both (4.1.2 (a))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Fluid leak harmful to the environment or a risk to other road users coolant leak (8.4.1 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear All position lamps light intensity significantly reduced (4.2.3 (a) (ii))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear All position lamps light intensity significantly reduced (4.2.3 (a) (ii))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS

Offside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Steering rack gaiter split (2.2.D.2d)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Steering rack gaiter split (2.2.D.2d)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Statutory seat belt of the wrong type. (5.1.1)

rear brake application uneven (3.7.B.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Front Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Obligatory mirror missing (8.1.1)

Front Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Windscreen wiper not operating over a large enough area to give an adequate view (8.2.1c)

Offside Windscreen wiper not operating over a large enough area to give an adequate view (8.2.1c)

Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Rear Subframe mounting prescribed area is inadequately repaired (2.4.A.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

all repairs must be seemwelded

n/s engine mounting bolts loose

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Front Windscreen wiper not operating automatically when switched on (8.2.1b)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Hazard warning switch faulty (1.4.B.1d)

Hazard warning tell tale not working correctly (1.4.B.1e)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Stop lamp not working (1.2.1b)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear brake drum in such a condition that it is seriously weakened (3.5.1i)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced (2.4.F.2)

Offside Rear Stop lamp not working (1.2.1b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear rear brake application uneven (3.7.B.2)

Service brake: efficiency below requirements (3.7.B.7)