1987 Yamaha V Max

Exhaust noisy (7.1.2)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Roller brake test indicates a binding brake (3.3.A1a)

Nearside Front shock absorber seal failed and leaking oil (2.3.3) DANGEROUS

Rear reflector on motorcycle missing (1.4.1) DANGEROUS

Steering headbearing has slight free play (2.2.2)

Offside Rear The rear brake disc is a smaller one than the OEM disc. This will cause the rear brake pads to wear with a shoulder when the pads get low the shoulders will butt up against each other. Thus rendering the rear brake in operable.

Exhaust noisy (7.1.2)

Rear reflector on motorcycle missing (1.4.1)

Front Roller brake test indicates a binding brake (3.3.A1a) DANGEROUS

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear wheel bearings have excessive free play (2.4.A.2c)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

repair to rear brake caliper

repair to rear wheel

Front Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a) DANGEROUS

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Wheel fractured significantly reducing the original strength (4.2.1a) DANGEROUS

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1a)

rear brake disc worn well below service limit

Exhaust noisy (7.1.2)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Rear Brake disc(s) slightly worn (3.2.A1l)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front wheel bearings are excessively rough (2.3.5b)

Rear Tyre fouling another component (4.1.4)

anodized brake components should be replaced