MOT Status
ExpiredMileage
1,205 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
inner and outer sills corroded
metal brake pipes corroded
rear wheel arches corrdoded
under body corroded
under body undersilled
engine damp with oil
front and rear wheel bearings slight play
inner sills corroded
rear arches corroded
under body under silled
underbody corroded
Nearside Rear Tyre Perished
Under Body Under Sealed
Both Front Wheel Bearings Slight Play
Both Rear Wheel Bearing Slight Play
Engine Damp With Oil
General Under Body Corrosion
Inner Sills Corroded
engine damp with oil
front cross member corroded
general under body corrosion
inner sills corroded
nearside rear tyre perished
underbody under silled
both front inner arches corroded
chassis legs corroded
general underbody corrosion
inner sills corroded
underbody undersilled
heavily under sealed
heavy underbody corrosion
play in front seats
slight play in osf wheel bearing
Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.A.3)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
heavily under sealed
heavy underbody corrosion
play in front seats
slight play in osf wheel bearing
Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
genral under body corrosion
this vehicle is heavily under silled and welded
Front Windscreen wiper not operating automatically when switched on (8.2.1b)
Offside Headlamp not working on main beam (1.7.5a)
Body has slight corrosion (6.1.B.2)
Brake pipe slightly corroded (3.6.B.2c)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Vehicle structure has slight corrosion (6.1.A.1)
Body has slight corrosion (6.1.B.2)
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Exhaust has a minor leak of exhaust gases (7.1.2)
Front Steering component mounting prescribed area is corroded but not considered excessive (2.2.C.1h)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive (3.1.9)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Vehicle structure has slight corrosion (6.1.A.1)
rear brake grabbing slightly (3.7.A.5b)
Offside Headlamp aim too high (1.8)
Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)
Nearside Rear Direction indicators not working (1.4.A.2c)
Offside Front Seat belt insecurely fixed to the vehicles structure (5.2.1a)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is inadequately repaired (2.4.A.3)
Body has slight corrosion (6.1.B.2)
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Exhaust has a minor leak of exhaust gases (7.1.2)
Front Steering component mounting prescribed area is corroded but not considered excessive (2.2.C.1h)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive (3.1.9)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Vehicle structure has slight corrosion (6.1.A.1)
rear brake grabbing slightly (3.7.A.5b)
Brakes imbalanced across an axle (3.7.B.5b)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Front Direction indicators not working (1.4.A.2c)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp not in a clean condition affecting beam image (1.2.4a)
Nearside Side repeater not working (1.4.A.2c)
Nearside Steering rack gaiter split (2.2.D.2d)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front wheel bearing has excessive play (2.5.A.3c)
Offside Headlamp aim too high (1.8)
Offside Rear Brake cable has wires broken and is significantly weakened (3.5.1b)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Steering rack gaiter split (2.2.D.2d)
Offside Rear Wheel nut(s) loose (4.2.A.1e) DANGEROUS
Offside Rear Wheel nut(s) missing (4.2.A.1e) DANGEROUS
Rear Stop lamp not working (1.2.1b) DANGEROUS
Body has slight corrosion (6.1.B.2)
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Front Steering component mounting prescribed area is corroded but not considered excessive (2.2.C.1h)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive (3.1.9)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear wheel bearing has slight play (2.6.2)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Vehicle structure has slight corrosion (6.1.A.1)
How Reliable is the Ford Capri?
Based on 101,843 MOT tests across 11,827 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
D693 BCW is a 1986 Ford Capri in Black with a 2,792cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 71.4%.
Across all 1986 Ford Capri models, the average MOT pass rate is 72.3% with a typical mileage of 50,647 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Capri fails its MOT is brake binding, accounting for 4,143 recorded failures. If you're considering buying D693 BCW, it's worth having these areas checked by a mechanic before committing.
The Ford Capri typically stays on UK roads for around 57 years. At 40 years old, this Ford Capri is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of D693 BCW?
You can check the full history of D693 BCW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was D693 BCW registered?
D693 BCW is a 1986 Ford Capri, first registered on 27 August 1986.
Is D693 BCW safe to buy?
The MOT history for D693 BCW shows 14 tests with a 71.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does D693 BCW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on D693 BCW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.