1986 Ford Capri

Welded / plated / under sealed

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Welded / plated / under sealed

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

welded / plated / under sealed

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

welded / plated / under sealed

Offside Steering rack has slight free play detected at steering wheel (2.3 (a) (i))

Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front to rear of sills (6.1.1 (c) (i))

Offside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front to rear of sills (6.1.1 (c) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

vech has been undersealed

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill/ floor pan (5.3.6 (a) (i))

Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Inner sill/floor pan corroded but not in a prescribed area

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material Behind brake drum (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill/ floor pan (5.3.6 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Oil leak

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Service brake: efficiency below requirements (3.7.B.7)

Steering system has excessive free play detected at the steering wheel (steering rack fitted) (2.2.A.1b)

Coolant leak

Oil leak

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Front Headlamps matched pair are not the same colour (1.7.6)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Battery insecure (1.9.1)

Nearside Front Side repeater missing (1.4.A.2b)

Offside Front Headlamp insecure (1.7.3)

Offside Front Side repeater missing (1.4.A.2b)

Offside Rear Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Offside Rear Stop lamp not working (1.2.1b)

Rear Brake pipe excessively corroded (3.6.B.2c)

Rear Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Steering rack gaiter insecure (2.2.D.2d)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Horn not working (1.6.2a)

Nearside Windscreen wiper blade missing (8.2.2)

Offside Front Direction indicator not working (1.4.A.2c)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Wheel nut(s) missing (4.2.A.1e)