MOT Status
ExpiredMileage
85,991 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch/rear of sill (6.1.1 (c) (i))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))
Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch/rear of sill (6.1.1 (c) (i))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Windscreen damaged but not adversely affecting driver's view stonechip - swept area (3.2 (a) (i))
Nearside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Nearside Windscreen washer not working (3.5 (a))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Offside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced / outer sill area (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Body has slight corrosion (6.1.B.2)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear Front wheel bearing has slight play (2.5.A.3c)
Nearside Rear rear brake recording little or no effort (3.7.B.5a)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear Front wheel bearing has slight play (2.5.A.3c)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust has a minor leak of exhaust gases (7.1.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
How Reliable is the Rover 213?
Based on 8,281 MOT tests across 1,997 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
D920 KAF is a 1986 Rover 213 in Blue with a 1,342cc petrol engine. This vehicle has been through 13 MOT tests with a personal pass rate of 53.8%.
Across all 1986 Rover 213 models, the average MOT pass rate is 67.8% with a typical mileage of 60,660 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Rover 213 fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 2,313 recorded failures. If you're considering buying D920 KAF, it's worth having these areas checked by a mechanic before committing.
The Rover 213 typically stays on UK roads for around 42 years. At 40 years old, this Rover 213 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of D920 KAF?
You can check the full history of D920 KAF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was D920 KAF registered?
D920 KAF is a 1986 Rover 213, first registered on 8 August 1986.
Is D920 KAF safe to buy?
The MOT history for D920 KAF shows 13 tests with a 53.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does D920 KAF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on D920 KAF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.