MOT Status
ExpiredMileage
65,901 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust system not adequately supported (7.1.1)
Front registration plate insecure (6.3.1b)
Hazard warning lamps inoperative (1.4.B.1b)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Steering rack gaiter split (2.2.D.2d)
Nearside Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear fog lamp not working (1.3.2b)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Steering rack gaiter split (2.2.D.2d)
Offside Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Brakes imbalanced across an axle (3.7.B.5b)
Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)
Horn control insecure (1.6.1)
Horn not working (1.6.2a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Windscreen wiper blade insecure (8.2.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Offside Windscreen wiper blade insecure (8.2.2)
Parking brake: efficiency below requirements (3.7.B.7)
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Service brake: efficiency below requirements (3.7.B.7)
Windscreen washer provides insufficient washer liquid (8.2.3)
Vehicle corroded
Nearside Front suspension has a suspension lower ball joint securing nut loose (2.5.B.1a) DANGEROUS
Nearside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS
Offside Front suspension has a suspension lower ball joint securing nut loose (2.5.B.1a) DANGEROUS
Offside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
small rust hole in drivers side front floor
bonnet safty catch missing
Nearside Track rod end ball joint has slight play (2.2.B.1f)
Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
slight seperation on rear no plate
Nearside Vehicle structure has slight corrosion (6.1.A.1)
Lower Steering column locking device insecure (2.1.6)
Nearside Headlamp aim too far to the left (1.8)
Nearside Rear Sub-frame attachment bracket/mounting insecure (2.4.G.1)
Nearside Steering rack gaiter split (2.2.D.2d)
Nearside rear brake recording little or no effort (3.7.B.5a)
Offside Headlamp aim too high (1.8)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Steering rack gaiter split (2.2.D.2d)
Offside Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Offside rear brake recording little or no effort (3.7.B.5a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Vehicle structure has slight corrosion (6.1.A.1)
Offside Vehicle structure has slight corrosion (6.1.A.1)
How Reliable is the Austin Mini 1000 City E?
Based on 44,703 MOT tests across 5,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
D956 TFM is a 1987 Austin Mini 1000 City E in Red with a 998cc petrol engine. This vehicle has been through 7 MOT tests with a personal pass rate of 42.9%.
Across all 1987 Austin Mini 1000 City E models, the average MOT pass rate is 63.8% with a typical mileage of 50,767 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Austin Mini 1000 City E fails its MOT is subframe mounting prescribed area is excessively corroded, accounting for 3,881 recorded failures. If you're considering buying D956 TFM, it's worth having these areas checked by a mechanic before committing.
The Austin Mini 1000 City E typically stays on UK roads for around 44 years. At 39 years old, this Austin Mini 1000 City E is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of D956 TFM?
You can check the full history of D956 TFM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was D956 TFM registered?
D956 TFM is a 1987 Austin Mini 1000 City E, first registered on 1 April 1987.
Is D956 TFM safe to buy?
The MOT history for D956 TFM shows 7 tests with a 42.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does D956 TFM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on D956 TFM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.