1986 Yamaha FJ1200

Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)

Drive chain worn to excess (6.2.1e)

Offside Headlamp aim so that beam "kick up" is not visible on the screen (1.6.B.1)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

Horn is not continous or uniform (1.7.3c)

Rear Drive chain slightly loose (6.2.1d)

Rear Rear reflector on motorcycle missing (1.4.1)

Rear Tyre worn close to the legal limit (4.1.3(i))

Rear Drive chain slightly loose (6.2.1d)

Rear Tyre worn close to the legal limit (4.1.3(i))

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

front mudguard missing

Brake disc(s) is slightly distorted (3.2.A1m)

Headlamp deteriorated but function not impaired (1.2.3a)

Lower Exhaust slightly deteriorated (7.1.1a)

Rear Brake pedal pivots slightly worn (3.1.3a)

Wheel alignment slightly misaligned. (2.5.1)

clutch lever ajustment

Brake pedal pivots slightly worn (3.1.3a)

Fairings insecure but not likely to impede the steering (2.1.2e)

mirror brocken

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Wheel alignment slightly misaligned. (2.5.1)

Front wheel bearings have slight free play (2.3.5b)

Rear wheel bearings have slight free play (2.4.A.2c)

Front Brake lever attachment screws missing (3.1.2b)

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Handlebar mounting clamp bolt loose (2.1.1a)

Rear reflector on motorcycle missing (1.4.1)

Rear suspension fouling which affects the movement of the rear suspension (2.4.A.3a)

Steering control fouling between components which interferes with the free movement of the steering (2.1.2a)

Stop lamp remains on when the brake is released (1.3.1e)

Engine bolts don't look tight on front of engine

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front wheel bearings have slight free play (2.3.5b)

Handlebars homemade strongly advise change †clutch pipe pipe on lock

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear wheel bearings have slight free play (2.4.A.2c)

Wheel alignment slightly misaligned. (2.5.1)