1996 Land Rover Defender

Drag link end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Suspension rod pin or bush excessively worn (5.3.4 (a) (i))

Rear Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear crossmember at front of rear axle,various places (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inside of chassis leg (5.3.6 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Towbar excessively corroded within 30cm of towbar mounting Chassis (6.1.6 (i) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outside faces of both rear chassis legs (5.3.6 (a) (i))

Front Brake pipe corroded, covered in grease or other material front to rear brake pipe (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material pipe to caliper (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material pipe to caliper (1.1.11 (c))

Offside Front bulkhead corroded through

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material across axle (1.1.11 (c))

Suspension component pin or bush slightly worn both radius arms (5.3.4 (a) (i))

trailer socket slightly damaged

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Rear Position lamp not working (4.2.1 (a))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Brake pipe corroded, covered in grease or other material front to rear brake pipe (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material pipe to caliper (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material pipe to caliper (1.1.11 (c))

Offside Front bulkhead corroded through

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material across axle (1.1.11 (c))

Suspension component pin or bush slightly worn both radius arms (5.3.4 (a) (i))

trailer socket slightly damaged

Offside front bulkhead corroded through outside prescribed areas.

Radius arm rubber bush deteriorated but not resulting in excessive movement Both bushes in both front arms (2.4.G.2)

Trailer electrical socket damaged, but the lead can still be securely connected (1.9.3b)

Exhaust has a major leak of exhaust gases Centre and rear (7.1.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded Outrigger (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassis (2.4.A.3)

Offside Rear Shock absorber detached (2.7.2b)

Offside Rear Tie bar/rod has excessive play in a pin/bush (2.4.G.2)

Service brake: efficiency below requirements (3.7.B.7)

Vehicle structure excessively corroded within 30cm of towbar mounting Both sides (6.6.6)

Offside front bulkhead corroded through outside prescribed areas.

Radius arm rubber bush deteriorated but not resulting in excessive movement Both bushes in both front arms (2.4.G.2)

Trailer electrical socket damaged, but the lead can still be securely connected (1.9.3b)

Front Brake pipe slightly corroded both sides to caliper (3.6.B.2c)

Offside Front Drag link end ball joint has slight play (2.2.B.1f)

Rear Brake pipe slightly corroded both sides across axle (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Brake pipe slightly corroded both sides to caliper (3.6.B.2c)

Offside Front Drag link end ball joint has slight play (2.2.B.1f)

Rear Brake pipe slightly corroded both sides across axle (3.6.B.2c)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Oil leak

Slight leak on steering box

Wear in nearside and offside front axle tie bar bushes

Nearside Rear Direction indicator not working (1.4.A.2c)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis leg (2.4.A.3)

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded chassis in three areas (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear propshaft universal joint worn

Slight leak on steering box

Wear in nearside and offside front axle tie bar bushes

Offside rear axle tie bar bush worn

Rear damper shrouds badly corroded

Rear propshaft universal joint worn

Slight leak on steering box

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Service brake: efficiency below requirements (3.7.B.7)

Offside rear axle tie bar bush worn

Rear damper shrouds badly corroded

Rear propshaft universal joint worn

Slight leak on steering box

brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Trailing arm has excessive play in a pin/bush (2.4.G.2)

Nearside Headlamp aim too low (1.8)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Front Coil spring mounting corroded and seriously weakened (2.4.C.3c)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Trailing arm has excessive play in a pin/bush (2.4.G.2)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Service brake: efficiency below requirements (3.7.C.1a)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Steering box has a slight oil leak (2.2.D.2e)

nearside front swivel housing leaking oil

steering damper bush worn

Front Brake pad(s) wearing thin (3.5.1g)

n/s/f tractor joint leaking slightly

steering box samp

nearside amd offside front hub seals leaking

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust has part of the system excessively deteriorated (7.1.1a)

Nearside Headlamp aim too low (1.8)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Service brake: efficiency below requirements (3.7.C.1a)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

front brake discs badly corroded

nearside and offside hub seals leaking

offside headlight loose

steering box damp

Oil leak

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Front Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Oil leak

Brake vacuum build up slow (3.3.E.6)

brake pedal feels wooden

Nearside Front Headlamp aim too high (1.8)

Nearside Front passenger seat insecure (6.2.3)

Offside Rear fog lamp not working (1.3.2b)

Brake vacuum build up slow (3.3.E.6)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1a)

brake pedal feels wooden

Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Stop lamp not working (1.2.1b)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

wiper blades split

Nearside Front Drag link end ball joint has excessive play (2.2.B.1f)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Radius arm has slight play in a pin/bush (2.4.G.2)

wiper blades split