MOT Status
ExpiredMileage
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Heavily undersealed underside
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Front Brake hose slightly twisted (1.1.12 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking mount (5.3.6 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))
Rear panel corroded and holed
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking mount (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension arm mount (5.3.6 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Brake pipe excessively corroded inner wing x2 (1.1.11 (c))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension arm mount (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Heavily undersealed underside
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Front Brake hose slightly twisted (1.1.12 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking mount (5.3.6 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))
Rear panel corroded and holed
Suspension arm corroded but not seriously weakened osf and nsf (5.3.3 (b) (i))
Suspension arm corroded but not seriously weakened osr and nsr (5.3.3 (b) (i))
corrosion to sliding doors
under verhicle corrosion and heavealy under sealed
Nearside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))
Offside Front Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) DANGEROUS
Suspension arm corroded but not seriously weakened osf and nsf (5.3.3 (b) (i))
Suspension arm corroded but not seriously weakened osr and nsr (5.3.3 (b) (i))
corrosion to sliding doors
under verhicle corrosion and heavealy under sealed
Brake pipe corroded, covered in grease or other material from abs unit (1.1.11 (c))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Brake pipe corroded, covered in grease or other material from abs unit (1.1.11 (c))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both inner and outer sills (6.2.2 (d) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive both (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both inner and outer sills (6.2.2 (d) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive both (5.3.6 (a) (i))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
underside has been waxoiled
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced chassis (7.1.1 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Anti-lock braking system wiring damaged but not excessively (1.6 (d))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
under body of vehicle corroded in several ares outside prescribed areas
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brake pipe excessively corroded abs pump - rear marked (3.6.B.2c)
Exhaust has a major leak of exhaust gases tail pipe (7.1.2)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Outer Track rod end ball joint has excessive play (2.2.B.1f)
Offside Rear rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
rear axle oil leak
Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Rear Brake pipe excessively corroded marked in 2x places (3.6.B.2c)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Offside Rear rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS
Offside Front Brake pipe slightly corroded (3.6.B.2c)
rear axle oil leak
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Headlamp has a product on the light source but not seriously reducing light output (1.7.5a)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear coil spring broken (2.4.C.1a)
Offside Rear coil spring broken (2.4.C.1a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Headlamp has a product on the light source but not seriously reducing light output (1.7.5a)
Parking brake lever has little reserve travel (3.1.6b)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Parking brake lever has little reserve travel (3.1.6b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
nearside wiper split
Front Brake pad(s) wearing thin (3.5.1g)
all brake discs worn
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too high (1.8)
engine oil level on minimum
n/s front brake pad warning wire cut
engine oil level on minimum
n/s front brake pad warning wire cut
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DA06 BVD is a 2006 Mercedes-benz Vito in Black with a 2,148cc diesel engine. This vehicle has been through 29 MOT tests with a personal pass rate of 58.6%.
Across all 2006 Mercedes-benz Vito models, the average MOT pass rate is 69.6% with a typical mileage of 121,092 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying DA06 BVD, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 20 years old, this Mercedes-benz Vito is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of DA06 BVD?
You can check the full history of DA06 BVD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DA06 BVD registered?
DA06 BVD is a 2006 Mercedes-benz Vito, first registered on 30 May 2006.
Is DA06 BVD safe to buy?
The MOT history for DA06 BVD shows 29 tests with a 58.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DA06 BVD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DA06 BVD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.