MOT Status
ValidMileage
135,683 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside outer sill corroded
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
offside and nearside rear inner sills corroded
Offside Front Position lamp not working (4.2.1 (a) (ii))
Registration plate lamp inoperative in the case of a single lamp or all lamps all (4.7.1 (b) (ii))
Offside Front Tyre worn close to legal limit/worn on edge just legal at time of test and very badly worn on inner edge (5.2.3 (e))
Offside outer sill corroded
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
offside and nearside rear inner sills corroded
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front Seat belt anchorage prescribed area is corroded but not considered excessive both inner to outer sills (7.1.1 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive both inner rear sill areas (5.3.6 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Front Seat belt anchorage prescribed area is corroded but not considered excessive both inner to outer sills (7.1.1 (a) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Suspension component mounting prescribed area is corroded but not considered excessive both inner rear sill areas (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Outstanding manufacturers safety recall found
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Exhaust mounting defective (6.1.2 (a))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front tyre wearing on inner edge
Nearside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front tyre wearing on inner tread area
Offside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
some corrosion to brake and suspension components
Nearside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front tyre wearing on inner tread area
Offside Headlamp not working on dipped beam bulb 477 replaced (4.1.1 (a) (ii))
Offside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
some corrosion to brake and suspension components
corrosion to brake and suspension components
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
corrosion to brake and suspension components
Offside front tyre wearing on inner edge
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Suspension arm rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
note damage to o/s/f bumper
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
note damage to o/s/f bumper
Front Brake pad(s) wearing thin (3.5.1g)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DA06 LNG is a 2006 Mazda 3 in Grey with a 1,598cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 65.4%.
Across all 2006 Mazda 3 models, the average MOT pass rate is 74.6% with a typical mileage of 70,278 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying DA06 LNG, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 20 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of DA06 LNG?
You can check the full history of DA06 LNG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DA06 LNG registered?
DA06 LNG is a 2006 Mazda 3, first registered on 15 June 2006.
Is DA06 LNG safe to buy?
The MOT history for DA06 LNG shows 26 tests with a 65.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DA06 LNG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DA06 LNG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.