2008 Honda Civic

Front Brake disc worn, pitted or scored, but not seriously weakened and rear (1.1.14 (a) (ii))

Front Brake pipe corroded, covered in grease or other material to back both sides (1.1.11 (c))

Front Shock absorbers has a serious fluid leak both sides (5.3.2 (b))

Front Brake disc worn, pitted or scored, but not seriously weakened and rear (1.1.14 (a) (ii))

Front Brake pipe corroded, covered in grease or other material to back both sides (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened and rear (1.1.14 (a) (ii))

Front Brake pipe corroded, covered in grease or other material to rear various places (1.1.11 (c))

Front Shock absorbers has light misting of oil both sides (5.3.2 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened and rear (1.1.14 (a) (ii))

Front Brake pipe corroded, covered in grease or other material to rear various places (1.1.11 (c))

Front Shock absorbers has light misting of oil both sides (5.3.2 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Headlamp aim too low both (4.1.2 (a))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords inner sidewall (5.2.3 (d) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

BOTH FRONT BRAKE DISCS AND PADS WORN

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Passenger's airbag obviously defective (5.4.1)

BOTH FRONT BRAKE DISCS AND PADS WORN

Rear Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Engine covers fitted obscuring some components in the engine bay

Nearside front brake juddering slightly (3.7.A.2b)

Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)

air bag light staying on

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Offside Body has a sharp edge caused by damage (6.1.C.1)

Offside Front position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Parking brake lever has no reserve travel (3.1.6b)

Offside Front Macpherson strut severely distorted (2.4.G.1) DANGEROUS

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Engine covers fitted obscuring some components in the engine bay

Nearside Front front brake juddering slightly (3.7.A.2b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

V.S.A. LIGHT STAYING ON.

off side front wheel excessive camber