2009 Kia Rio

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Brake pipe corroded, covered in grease or other material to flexy (1.1.11 (c))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Central Exhaust mounting defective (6.1.2 (a))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Front Exhaust has a minor leak of exhaust gases flexy pipe (6.1.2 (a))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Tyre slightly damaged/cracking or perishing both rear tyres have cracking on both outer and inner faces (5.2.3 (d) (ii))

Front Exhaust system insecure (6.1.2 (a))

Nearside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i))

Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Exhaust has a minor leak of exhaust gases flexy pipe (6.1.2 (a))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Tyre slightly damaged/cracking or perishing both rear tyres have cracking on both outer and inner faces (5.2.3 (d) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush starting to come unbonded (5.3.4 (a) (i))

Central Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Central Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Headlamp aim too low (4.1.2 (a))

Central Exhaust mounting defective bracket broken (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Headlamp levelling device inoperative (4.1.5 (a))

Central Exhaust mounting defective bracket broken (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

N/S/F Tyre close to legal limit...

O/S/F Tyre very close to legal limit...

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)