MOT Status
ValidMileage
133,567 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake disc worn, pitted or scored, but not seriously weakened & rear (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge 2.mm (5.2.3 (e))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Inner Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
oil leak
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))
Front Windscreen washer not working (3.5 (a))
Nearside Front Road wheel fixing missing & offside (5.2.1 (a) (i))
Nearside Front Suspension arm ball joint excessively worn & offside (5.3.4 (a) (i))
Nearside Rear Road wheel fixing missing & offside (5.2.1 (a) (i))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Rear Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))
Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm 1.mm (5.2.3 (e)) DANGEROUS
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened & rear (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge 2.mm (5.2.3 (e))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Tyre slightly damaged/cracking or perishing inner (5.2.3 (d) (ii))
oil leak
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Obligatory mirror seriously obscured affecting the rear view (8.1.2a)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
How Reliable is the Audi Q7?
Based on 556,904 MOT tests across 56,360 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DA10 CNC is a 2010 Audi Q7 in Black with a 2,967cc diesel engine. This vehicle has been through 17 MOT tests with a personal pass rate of 76.5%.
Across all 2010 Audi Q7 models, the average MOT pass rate is 83.2% with a typical mileage of 84,262 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Audi Q7 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 6,208 recorded failures. If you're considering buying DA10 CNC, it's worth having these areas checked by a mechanic before committing.
The Audi Q7 typically stays on UK roads for around 20 years. At 16 years old, this Audi Q7 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of DA10 CNC?
You can check the full history of DA10 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DA10 CNC registered?
DA10 CNC is a 2010 Audi Q7, first registered on 27 May 2010.
Is DA10 CNC safe to buy?
The MOT history for DA10 CNC shows 17 tests with a 76.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DA10 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DA10 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.