MOT Status
ValidMileage
94,576 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
vehicle is undersealed
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Rear rear axle corroded
fuel filler hose bracket corroded.
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DA13 CNC is a 2013 Mazda 3 in Black with a 1,598cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 61.1%.
Across all 2013 Mazda 3 models, the average MOT pass rate is 82.4% with a typical mileage of 53,979 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying DA13 CNC, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 13 years old, this Mazda 3 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of DA13 CNC?
You can check the full history of DA13 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DA13 CNC registered?
DA13 CNC is a 2013 Mazda 3, first registered on 27 June 2013.
Is DA13 CNC safe to buy?
The MOT history for DA13 CNC shows 18 tests with a 61.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DA13 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DA13 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.