2001 MG Zr

Offside Front Headlamp aim too low (1.8)

Battery insecure (1.9.1)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

offside and nearside sideskirts loose but not insecure

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

offside front tyre worn inner shoulder

offside tyre cracks inner sidewall

sideskirts loose

Front Driver's seat cannot be secured in the upright position. (6.2.A.2)

Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

offside front tyre worn inner shoulder

offside tyre cracks inner sidewall

sideskirts loose

Nearside Front constant velocity joint is insecure (2.5.C.1b)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Stop lamp excessively deteriorated so that it is not visible from a reasonable distance (1.2.1d)

Front registration plate deteriorated (6.3.1d)

Parking brake lever has no reserve travel (3.1.6b)

Body has slight corrosion (6.1.B.2)

Body has slight corrosion (6.1.B.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp not working on main beam (1.7.5a)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Brake vacuum build up too slow (3.3.E.6)

Headlamp not in good working order adversely affecting beam image (1.2.4a)

Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Headlamp not working on main beam (1.7.5a)