2002 Mazda MX-5

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Upper Suspension arm corroded but not seriously weakened and lower arms (5.3.3 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Upper Suspension arm corroded but not seriously weakened and lower arms (5.3.3 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill -floor sections (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill-floor sections (5.3.6 (a) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Upper Suspension arm corroded but not seriously weakened and lower arms (5.3.3 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Upper Suspension arm corroded but not seriously weakened and lower arms (5.3.3 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake disc worn, but not excessively both (1.1.14 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Service brake binding but not excessively both (1.2.1 (f))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Rear Brake disc worn, but not excessively both (1.1.14 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Service brake binding but not excessively both (1.2.1 (f))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Slight travel on handbrake

Offside Front outer wall cracked

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Parking brake lever has no reserve travel (3.1.6b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm outer wall (4.1.E.1) DANGEROUS

Offside Front outer wall cracked

Nearside Brake pipe excessively corroded front to rear (3.6.B.2c)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Stop lamp not working (1.2.1b)

Offside front brake binding (3.7.B.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Horn not working (1.6.2a)

Offside Rear coil spring broken (2.4.C.1a)

Offside Registration plate lamp not working (1.1.C.1d)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

nearside rear tyre perished

offside rear tyre perished

Front Brake pad(s) wearing thin (3.5.1g)

rear discs pitted

Front brake disc slightly pitted (3.5.1h)

Oil leak

Front registration plate margin less than the minimum requirement (6.3.4g)

Front brake disc slightly pitted (3.5.1h)

Oil leak