2003 Peugeot 206

Engine MIL inoperative or indicates a malfunction

Front Headlamp has a product on the lens but not seriously reducing light output Both (4.1.4 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Strong Advise (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Engine MIL inoperative or indicates a malfunction

Front Headlamp has a product on the lens but not seriously reducing light output Both (4.1.4 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Strong Advise (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output Both (4.1.4 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Rear Tyre slightly damaged/cracking or perishing Both (5.2.3 (d) (ii))

Rear Upper Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Brake pipe corroded, covered in grease or other material Front to Rear (1.1.11 (c))

Engine MIL inoperative or indicates a malfunction

Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Tyre slightly damaged/cracking or perishing Both (5.2.3 (d) (ii))

Under-body of vehicle corroded

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Brake pipe slightly corroded Front to rear (3.6.B.2c)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Both sides (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Direction indicators slightly discoloured (1.4.A.2f)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Direction indicators slightly discoloured (1.4.A.2f)

Nearside Stop lamp not working (1.2.1b)

Offside Rear Rear position lamp(s) not working (1.1.A.3b)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Mechanical brake component has restricted free movement (3.5.1k)

Nearside Rear All position lamps not working (1.1.A.3b)

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced (2.4.F.2)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Side repeater incorrect colour (1.4.A.2f)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced (2.4.F.2)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Front Headlamp aim too high (1.8)

Offside Front Side repeater incorrect colour (1.4.A.2f)

Centre Rear Exhaust has a major leak of exhaust gases (7.1.2)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)