2003 Peugeot 206

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Rear Suspension rod pin or bush excessively worn (5.3.4 (a) (i))

Nearside Side repeater incorrect colour (4.4.3 (a))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Lower Suspension arm pin or bush excessively worn INNER (5.3.4 (a) (i))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Sub-frame pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Suspension rod pin or bush excessively worn (5.3.4 (a) (i))

Rear Registration plate inscription illegible (0.1 (b))

Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Rear Stub axle has excessive vertical movement between stub axle and axle beam (5.1.2 (c) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp not working on dipped beam (1.7.5a)

Rear registration plate faded but not likely to be misread (6.3.1d)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Body has a sharp edge caused by damage grill moulding (6.1.C.1)

Nearside Front Headlamp aim too high (1.8)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Lower Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Rear Rear fog lamp not working (1.3.2b)

Offside Rear Radius arm slightly distorted axle bush or arm twisted. (2.4.G.1)

n/s/f lower pinch bolt double nut to check

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear rear brake binding (3.7.B.1)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear fog lamp not working (1.3.2b)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Headlamp aim too high (1.8)

Offside Front Ball joint has excessive play (2.2.B.1f)

Offside Headlamp aim too low (1.8)

Parking brake lever has no reserve travel (3.1.6b)

Rear Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Parking brake lever has little reserve travel (3.1.6b)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Parking brake lever has little reserve travel (3.1.6b)

front brake discs worn

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Headlamp aim too high (1.8)

Nearside Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Front Headlamp aim too low (1.8)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Front Brake pad(s) wearing thin (3.5.1g)