MOT Status
ValidMileage
120,757 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Exhaust has a minor leak of exhaust gases flexi pipe (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Outer Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Upper Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Upper Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust has a minor leak of exhaust gases flexi pipe (6.1.2 (a))
Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Outer Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Upper Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Upper Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Lower Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced Both side (6.1.1 (c) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pad(s) wearing thin Both side (1.1.13 (a) (ii))
Rear Suspension arm corroded but not seriously weakened Both side (5.3.3 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Both side (6.1.1 (c) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Rear Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Front tyre has cut to outer side wall
Nearside Rear bump stop broken
Nearside Rear coil spring corroded (2.4.C.1b)
Nearside Rear tyre cracked
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear bump stop broken
Offside Rear coil spring corroded (2.4.C.1b)
Offside Rear tyre cracked
Nearside Rear coil spring corroded (2.4.C.1b)
Nearside Rear tyre cracked
Offside Rear coil spring corroded (2.4.C.1b)
Offside Rear tyre cracked
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Front tyre low on inner edge
Nearside Rear tyre has a damaged side wall
Offside Front coil spring corroded (2.4.C.1b)
Offside Front tyre low on inner edge
Offside Rear tyre has cracks on tread
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear coil spring corroded (2.4.C.1b)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear coil spring corroded (2.4.C.1b)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DA55 WHC is a 2006 Mazda 3 in Silver with a 1,598cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 78.3%.
Across all 2006 Mazda 3 models, the average MOT pass rate is 74.6% with a typical mileage of 70,278 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying DA55 WHC, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 20 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of DA55 WHC?
You can check the full history of DA55 WHC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DA55 WHC registered?
DA55 WHC is a 2006 Mazda 3, first registered on 25 January 2006.
Is DA55 WHC safe to buy?
The MOT history for DA55 WHC shows 23 tests with a 78.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DA55 WHC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DA55 WHC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.