2007 Honda Cbr 125 RS-6

Front Fuel tank slightly loose (6.1.3 (a) (i))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Drive chain slightly loose (6.1.7 (c) (i))

Rear Exhaust slightly loose silencer slightly loose. (6.1.2 (a))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Brake cylinder leaking and braking performance affected (1.1.16 (b) (ii)) DANGEROUS

Front Tyre worn close to the legal limit soft in pressure (5.2.3 (e))

Rear Chain guard slightly loose (6.1.7 (i))

Rear Drive chain slightly tight (6.1.7 (k) (i))

Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Suspension corroded but not seriously weakened swing arm shock mount (5.3.3 (b) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Lower Steering headbearing has slight free play (2.2.2 (f) (i))

Front Tyre worn close to the legal limit on limit 1.0mm (5.2.3 (e))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Wheel alignment slightly misaligned (2.4 (a))

Front Drive chain sprocket worn to excess hooked on teeth (6.1.7 (c) (i))

Headlamp aim not tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Lower Steering headbearing has slight free play (2.2.2 (f) (i))

Front Tyre worn close to the legal limit on limit 1.0mm (5.2.3 (e))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Wheel alignment slightly misaligned (2.4 (a))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Rear Brake disc(s) excessively scored (3.2.A1l)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Front Roller brake test indicates a sticking brake (3.3.A1a) DANGEROUS

speedo cable snapped

Drive chain excessively loose (6.2.1d)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Stop lamp remains on when the brake is released (1.3.1e)

Front Stop lamp remains on when the brake is released (1.3.1e)

Rear Drive chain excessively tight (6.2.1d)