MOT Status
ValidMileage
130,347 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Upper Macpherson strut mounting damaged but not seriously weakened top mount worn (5.3.3 (b) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
rear tyres worn inner edges
Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
rear tyres worn inner edges
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Lower Suspension arm ball joint excessively worn ball joint loose in wishbone (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Exhaust has a minor leak of exhaust gases corroded and slight blow (6.1.2 (a))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Exhaust has a minor leak of exhaust gases corroded and slight blow (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge on legal limit , bald inner edge (5.2.3 (e))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))
Nearside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner sill corrosion setting in (6.1.1 (c) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner sill corrosion setting in (6.1.1 (c) (i))
Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner sill corrosion setting in (6.1.1 (c) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner sill corrosion setting in (6.1.1 (c) (i))
Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill corrosion setting in (6.1.1 (c) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill corrosion setting in (6.1.1 (c) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill corrosion setting in (6.1.1 (c) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill corrosion setting in (6.1.1 (c) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Rear Tyre worn close to the legal limit 2-3mm (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit on limit (4.1.E.1)
centre brake light inop
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Registration plate lamp not working (1.1.C.1d)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Windscreen washer provides insufficient washer liquid (8.2.3)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DA60 BLK is a 2010 Mazda 3 in Silver with a 1,598cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 61.9%.
Across all 2010 Mazda 3 models, the average MOT pass rate is 77.7% with a typical mileage of 68,318 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying DA60 BLK, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 16 years old, this Mazda 3 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of DA60 BLK?
You can check the full history of DA60 BLK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DA60 BLK registered?
DA60 BLK is a 2010 Mazda 3, first registered on 30 November 2010.
Is DA60 BLK safe to buy?
The MOT history for DA60 BLK shows 21 tests with a 61.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DA60 BLK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DA60 BLK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.