2012 Peugeot Boxer

Integral body structure is corroded but structural rigidity is not significantly reduced floor area corroded and covered in underbody coating (6.1.1 (c) (i))

Offside Side repeater lens defective which has no effect on emitted light damage and repair to lens (4.4.1 (b) (i))

Rear Suspension component corroded but not seriously weakened spring and shock absorber mounting areas corroded (5.3.3 (b) (i))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill area corroded and holed near to spring mounting (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill area corroded and holed near to spring mounting (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced floor area corroded and covered in underbody coating (6.1.1 (c) (i))

Offside Side repeater lens defective which has no effect on emitted light damage and repair to lens (4.4.1 (b) (i))

Rear Suspension component corroded but not seriously weakened spring and shock absorber mounting areas corroded (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring mounting areas corroded and covered in underseal (5.3.6 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement suspension arm rear bush worn and deteriorated (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring mounting areas corroded and covered in underseal (5.3.6 (a) (i))

Offside Side repeater lens defective which has no effect on emitted light damage to lens (4.4.1 (b) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring mounting areas corroded and covered in underseal (5.3.6 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement suspension arm rear bush worn and deteriorated (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring mounting areas corroded and covered in underseal (5.3.6 (a) (i))

Offside Side repeater lens defective which has no effect on emitted light damage to lens (4.4.1 (b) (i))

Central Integral body structure is repaired but structural rigidity is not significantly reduced Repair covered in underseal (6.1.1 (d) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Mirror and side repeater lens damaged

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Rear Shock absorbers corroded

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Central Floor excessively deteriorated by handbrake and chassie (6.2.4 (a) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush excessively worn big rear bush (5.3.4 (a) (i))

Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced off side and near side front jacking points corroded (6.1.1 (c) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement split (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Offside Rear Lower Registration plate lamp insecure (4.7.1 (c) (i))

Offside Rear Tyre slightly damaged/cracking or perishing hevaly cracked (5.2.3 (d) (ii))

Rear Both rear shocks corroded

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security off side and near side (6.2.2 (d) (i))

off side front mirror cover damaged

rear brake discs worn

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear reflector missing (4.8.2 (a) (ii))

Offside Rear reflector missing (4.8.2 (a) (ii))

Offside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Integral body structure is deformed but structural rigidity is not significantly reduced floor and sills (6.1.1 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Service brake excessively binding (1.2.1 (f))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Front Shock absorber has a light misting of oil (2.7.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Rear Direction indicator incorrect colour both (1.4.A.2f)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside mirror backing damaged

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7)