MOT Status
ExpiredMileage
141,183 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Tyre slightly damaged (5.2.3 (d) (ii))
Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Front Upper Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Side repeater not working (4.4.1 (a) (ii))
Rear Brake disc significantly and obviously worn both (1.1.14 (a) (i))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii))
Emissions not tested eml and mis-fire (8.2.1.2 (d))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
How Reliable is the Audi A5?
Based on 1,497,195 MOT tests across 148,987 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DA62 CNC is a 2013 Audi A5 in Black with a 1,984cc petrol engine. This vehicle has been through 12 MOT tests with a personal pass rate of 83.3%.
Across all 2013 Audi A5 models, the average MOT pass rate is 83.1% with a typical mileage of 70,884 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Audi A5 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 17,175 recorded failures. If you're considering buying DA62 CNC, it's worth having these areas checked by a mechanic before committing.
The Audi A5 typically stays on UK roads for around 19 years. At 13 years old, this Audi A5 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of DA62 CNC?
You can check the full history of DA62 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DA62 CNC registered?
DA62 CNC is a 2013 Audi A5, first registered on 18 January 2013.
Is DA62 CNC safe to buy?
The MOT history for DA62 CNC shows 12 tests with a 83.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DA62 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DA62 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.