MOT Status
ValidMileage
119,711 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Nearside Rear Inner Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Exhaust emissions likely to be affected by an induction leak (8.2.2.1 (b))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm BADLY WORN INNER EDGE (5.2.3 (e)) DANGEROUS
Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Fuel Pipe/s corroded
INJECTOR LEAKING EXHAUST GAS
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Brake pad(s) wearing thin REPLACEMENT ADVISED (1.1.13 (a) (ii))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement TRAILING ARM (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge WORN INNER EDGE (5.2.3 (e))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement TRAILING ARM (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Service brake binding but not excessively both o/s & n/s (1.2.1 (f))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced + rear suspension components (6.1.1 (c) (i))
injector seal blowing
Headlamp light source and lamp not compatible hids fitted (not factory fitted) dipped & main beam (4.1.4 (c))
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Service brake binding but not excessively both o/s & n/s (1.2.1 (f))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced + rear suspension components (6.1.1 (c) (i))
injector seal blowing
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Service brake binding but not excessively both sides (1.2.1 (f))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Service brake binding but not excessively both sides (1.2.1 (f))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Tyre worn close to legal limit/worn on edge both rear (5.2.3 (e))
Front Tyre worn close to legal limit/worn on edge o/s and n/s (5.2.3 (e))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Headlamp aim too high (1.8)
Offside Stop lamp not working (1.2.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside front brake fluctuating, but not excessively (3.7.B.3)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DAJ 127Y is a 2010 Mazda 3 in Blue with a 1,560cc diesel engine. This vehicle has been through 19 MOT tests with a personal pass rate of 68.4%.
Across all 2010 Mazda 3 models, the average MOT pass rate is 77.7% with a typical mileage of 68,318 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying DAJ 127Y, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 16 years old, this Mazda 3 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of DAJ 127Y?
You can check the full history of DAJ 127Y by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DAJ 127Y registered?
DAJ 127Y is a 2010 Mazda 3, first registered on 6 September 2010.
Is DAJ 127Y safe to buy?
The MOT history for DAJ 127Y shows 19 tests with a 68.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DAJ 127Y have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DAJ 127Y. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.