2009 Yamaha FZ1

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Headlamp aim unable to be tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Brake pedal pivot excessively tight pedal or mastercylinder seized (1.1.1 (a))

Rear Stop lamp not working (4.3.1 (a) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Lower Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Clutch lever shortened. (6.2.1g)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Number plate lamp not working

Offside Steering control has reduced clearance at full lock not affecting the riders grasp of handlebars (2.1.2b)

Rear suspension bearing has slight free play (2.4.A2a(i))

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Registration plate not fixed vertically, or as close to vertical as is reasonably practical (6.3.2b)

Registration plate with character(s) which are not the correct height (6.3.4a)

Registration plate with character(s) which are not the correct stroke width (6.3.4a)

Registration plate with character(s) which are not the correct width (6.3.4a)

Clutch lever shortened. (6.2.1g)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Number plate lamp not working

Offside Steering control has reduced clearance at full lock not affecting the riders grasp of handlebars (2.1.2b)

Rear suspension bearing has slight free play (2.4.A2a(i))