2003 Ford Ka

All position lamps not working (1.1.A.3b)

Front Bonnet retaining device insecure (8.4.2)

Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings subframe mounting area coroded. (6.1.B.2)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and os inner arches/subframe area. (6.1.B.2)

Nearside Rear Stop lamp not working (1.2.1b)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and osr chassis legs coroded (6.1.B.2)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and osr sill coroded (6.1.B.2)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and os floor (6.1.B.2)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and os sill (6.1.B.2)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Direction indicator incorrect colour nsr/osr (1.4.A.2f)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

All position lamps not working (1.1.A.3b)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Nearside Front Subframe mounting prescribed area is excessively corroded floor (2.4.A.3)

Nearside Front Subframe mounting prescribed area is excessively corroded inner wheel arch area (2.4.A.3)

Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill at most rear area (2.4.A.3)

Nearside Rear coil spring broken (2.4.C.1a)

Nearside Stop lamp not working (1.2.1b)

Offside Front Subframe mounting prescribed area is excessively corroded floor (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded inner wheel arch area (2.4.A.3)

Offside Rear Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Registration plate lamp not working both (1.1.C.1d)

Windscreen wiper does not clear the windscreen effectively both (8.2.2)

rear brake application uneven 46% (3.7.B.2)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Tyre worn close to the legal limit scrubbing outer edge (4.1.E.1)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive strut turret area (2.4.A.3)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Oil leak ()

chassis corroded and in very poor condition in places

exhaust in poor condition (has multiple leaks in old weld repairs)

windscreen damage outside swept area (advise replacement)

Front Suspension arm rubber mounting deteriorated resulting in excessive movement both sides rear bushes (2.4.G.2)

Front position lamp(s) not working both (1.1.A.3b)

Registration plate lamp not working both (1.1.C.1d)

Suspension component mounting prescribed area is excessively corroded both inner / outer sills and both rear inner arches (2.4.A.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Brake pedal slightly spongy

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Body has slight corrosion (6.1.B.2)

Nearside Rear Body has slight corrosion (6.1.B.2)

Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)

Offside Brake pipe slightly corroded (3.6.B.2c)

Offside Front Body has slight corrosion (6.1.B.2)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside rear tyre perished & severe cuts on inner sidewall but not deep enough to reach cords

Offside side repeater lense missing but not showing white light

Oil leaks

Rear bumper damaged

Spare tyre defective

Nearside Front Shock absorber has an excessively worn shock absorber pivot (2.7.4)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Headlamp not working on main beam (1.7.5a)

Offside Rear Direction indicator insecure (1.4.A.2b)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Oil leak

Nearside Headlamp aim too high and too far to the right. (1.8)

Offside Rear coil spring fractured (2.4.C.1a)

Offside Stop lamp not working (1.2.1b)

Offside front brake juddering severely (3.7.A.2b)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Oil leak

Nearside front brake juddering severely (3.7.A.2b)

Nearside Headlamp aim too low and too far to the right. (1.8)

Offside Headlamp aim too low and too far to the right. (1.8)

Offside front brake juddering slightly (3.7.A.2b)

Nearside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside front brake juddering slightly (3.7.A.2b)