MOT Status
ExpiredMileage
83,452 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Headlamp aim too low (1.8)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded wheel arch (5.2.6)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded floor (5.2.6)
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Headlamp aim too low (1.8)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Seat belt anchorage prescribed area is excessively corroded wheel arch (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded floor (5.2.6)
Offside Stop lamp not working (1.2.1b)
Seat belt anchorage prescribed area is excessively corroded os sill step (5.2.6)
Brake pipe slightly corroded (3.6.B.2c)
Exhaust has a minor leak of exhaust gases (7.1.2)
Front Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Power steering component(s) has slight seepage from a component (2.3.3b)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Parking brake lever has little reserve travel (3.1.6b)
body corroded
has foot brake travel slight
prescibed areas corroded
rear beam axle bush has slight play
Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Outer sill undersealed
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear coil spring fractured (2.4.C.1a)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1) DANGEROUS
Offside Front Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1) DANGEROUS
Nearside Rear coil spring fractured (2.4.C.1a)
Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)
Offside Rear Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Offside Rear rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Stop lamp not working (1.2.1b)
Offside Front coil spring fractured (2.4.C.1a)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Parking brake lever has no reserve travel (3.1.6b)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DCZ 3412 is a 2000 Ford Ka in Green with a 1,299cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 53.3%.
Across all 2000 Ford Ka models, the average MOT pass rate is 62.2% with a typical mileage of 56,069 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying DCZ 3412, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 26 years old, this Ford Ka is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of DCZ 3412?
You can check the full history of DCZ 3412 by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DCZ 3412 registered?
DCZ 3412 is a 2000 Ford Ka, first registered on 1 June 2000.
Is DCZ 3412 safe to buy?
The MOT history for DCZ 3412 shows 15 tests with a 53.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DCZ 3412 have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DCZ 3412. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.