2002 Hyosung Cruise II

Exhaust noisy (8.1.1 (a))

Exhaust slightly loose (6.1.2 (a))

Front Front tire perished

Suspension arm slightly loose Swingarm (5.3.3 (a) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust slightly loose (6.1.2 (a))

Front Stop lamp not working (4.3.1 (a) (ii))

Headlamp aim too low (4.1.2 (a))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Stop lamp lens defective such that the emitted light is adversely affected (4.3.1 (b) (ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust silencer slightly loose (8.1.1 (b) (i))

Front Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

steering headrace bearings slightly rough

Nearside Rear Shock absorber has negligible damping effect (5.3.2 (b))

Offside Front Footrest insecure footpeg incorrect for bike (6.2.12 (a))

Offside Rear Shock absorber has negligible damping effect (5.3.2 (b))

Rear Footrest missing o/s & n/s rear footrests missing (6.2.12 (a))

Front Brake fluid below minimum mark (1.1.10 (d) (i))

front wheel spindle nut securing clip missing

steering headrace bearings slightly rough

Front Headlamp aim too far to the right (1.6)

Rear Drive chain slightly loose (6.2.1d)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Drive chain slightly loose (6.2.1d)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Headlamp aim beam image kick up to the offside (1.6)

Stop lamp remains on when the brake is released (1.3.1e)

front tyre pressure low

Headlamp aim beam image kick-up is to the offside (1.6.1)

Rear reflector on motorcycle missing (1.4.1)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)