MOT Status
ExpiredMileage
245,569 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Body has slight corrosion (6.1.B.2)
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Brake pipe slightly corroded front to rear (3.6.B.2c)
Centre Vehicle structure has slight corrosion (6.1.A.1)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Vehicle structure has slight corrosion (6.1.A.1)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Shock absorber has a slightly worn bush (2.7.4)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Nearside Rear Shock absorber has a slightly worn bush (2.7.4)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Shock absorber has a slightly worn bush (2.7.4)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front wheel bearing has slight play (2.5.A.3c)
Offside Rear Shock absorber has a slightly worn bush (2.7.4)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake actuating linkage mounting prescribed area is corroded but not considered excessive (3.3.A.2)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Vehicle structure has slight corrosion (6.1.A.1)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Suspension component mounting prescribed area is corroded but not considered excessive front inner wings (2.4.A.3)
exhaust deteriorated
front brake pads not visible at time of test
front brakes imbalanced
offside seat belt not fully retracting
rear constant velocity joint gaiters deteriorated
rear differential mounting defective
service brake efficiency only just met 52%
vehicle emits smoke or vapour of any colour but not considered excessive
Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Seat belt anchorage prescribed area is excessively corroded offside front inner sill (5.2.6)
Suspension component mounting prescribed area is excessively corroded nearside & offside front chassis legs (2.4.A.3)
Body has slight corrosion (6.1.B.2)
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Brake pipe slightly corroded front to rear (3.6.B.2c)
Centre Vehicle structure has slight corrosion (6.1.A.1)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Vehicle structure has slight corrosion (6.1.A.1)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Shock absorber has a slightly worn bush (2.7.4)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Nearside Rear Shock absorber has a slightly worn bush (2.7.4)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Shock absorber has a slightly worn bush (2.7.4)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front wheel bearing has slight play (2.5.A.3c)
Offside Rear Shock absorber has a slightly worn bush (2.7.4)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake actuating linkage mounting prescribed area is corroded but not considered excessive (3.3.A.2)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Vehicle structure has slight corrosion (6.1.A.1)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Suspension component mounting prescribed area is corroded but not considered excessive front inner wings (2.4.A.3)
exhaust deteriorated
front brake pads not visible at time of test
front brakes imbalanced
offside seat belt not fully retracting
rear constant velocity joint gaiters deteriorated
rear differential mounting defective
service brake efficiency only just met 52%
vehicle emits smoke or vapour of any colour but not considered excessive
Body has slight corrosion (6.1.B.2)
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Brake pipe slightly corroded (3.6.B.2c)
Brake pipe slightly corroded (3.6.B.2c)
Centre Vehicle structure has slight corrosion (6.1.A.1)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension weakened but no possibility of the body or a component fouling a road wheel (2.4.A.1b)
Front Vehicle structure has slight corrosion (6.1.A.1)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Shock absorber has a slightly worn bush (2.7.4)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside rear brake fluctuating, but not excessively (3.7.B.3)
Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Shock absorber has a slightly worn bush (2.7.4)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front wheel bearing has slight play (2.5.A.3c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Vehicle structure has slight corrosion (6.1.A.1)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
exhaust deteriorated
exhaust emits a large amount of white smoke
nearside & offside rear outer driveshaft gaiters deteriorated
nearside front seatbelt slow to retract
rear diff front mounting bush defective
Body has slight corrosion (6.1.B.2)
Brake actuating linkage mounting prescribed area is corroded but not considered excessive (3.3.A.2)
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Brake pipe slightly corroded (3.6.B.2c)
Brake pipe slightly corroded (3.6.B.2c)
Centre Vehicle structure has slight corrosion (6.1.A.1)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Vehicle structure has slight corrosion (6.1.A.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Direction indicator slightly discoloured (1.4.A.2f)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Vehicle structure has slight corrosion (6.1.A.1)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
exhaust deteriorated
nearside & offside rear outer driveshaft gaiter deteriorated
Body has slight corrosion (6.1.B.2)
Brake pipe slightly corroded (3.6.B.2c)
Centre Vehicle structure has slight corrosion (6.1.A.1)
Front Vehicle structure has slight corrosion (6.1.A.1)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Vehicle structure has slight corrosion (6.1.A.1)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
exhaust deteriorated
exhaust emits smoke of any colour but not considered to be excessive
nearside & offside rear drive shaft outer gaiters slightly deteriorated
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside rear brake juddering severely (3.7.A.5b)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside rear brake juddering severely (3.7.A.5b)
rear brake application uneven (3.7.B.2)
rear brakes release unevenly (3.7.B.4)
Body has slight corrosion (6.1.B.2)
Brake pipe slightly corroded (3.6.B.2c)
Centre Vehicle structure has slight corrosion (6.1.A.1)
Front Vehicle structure has slight corrosion (6.1.A.1)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Vehicle structure has slight corrosion (6.1.A.1)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
exhaust deteriorated
exhaust emits smoke of any colour but not considered to be excessive
nearside & offside rear drive shaft outer gaiters slightly deteriorated
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Stop lamp not working (1.2.1b)
Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
How Reliable is the Toyota Hiace?
Based on 336,612 MOT tests across 26,029 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DE03 AGV is a 2003 Toyota Hiace in Silver with a 2,494cc diesel engine. This vehicle has been through 16 MOT tests with a personal pass rate of 75%.
Across all 2003 Toyota Hiace models, the average MOT pass rate is 73.9% with a typical mileage of 113,741 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Toyota Hiace fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 8,788 recorded failures. If you're considering buying DE03 AGV, it's worth having these areas checked by a mechanic before committing.
The Toyota Hiace typically stays on UK roads for around 36 years. At 23 years old, this Toyota Hiace is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of DE03 AGV?
You can check the full history of DE03 AGV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DE03 AGV registered?
DE03 AGV is a 2003 Toyota Hiace, first registered on 14 April 2003.
Is DE03 AGV safe to buy?
The MOT history for DE03 AGV shows 16 tests with a 75% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DE03 AGV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DE03 AGV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.