MOT Status
ExpiredMileage
112,411 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake load sensing valve seized (3.6.E.3)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Headlamp aim too low (1.8)
Rear fog lamp not working (1.3.2b)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Outer Suspension arm has excessive play in a ball joint (2.4.G.2) DANGEROUS
Offside Front Outer Suspension arm has excessive play in a ball joint (2.4.G.2) DANGEROUS
Offside Rear Radius arm has excessive play in a pin/bearing (2.4.G.2) DANGEROUS
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Oil leak ()
Rear Exhaust has a minor leak of exhaust gases exhaust in poor condition (7.1.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Parking brake: efficiency below requirements (3.7.B.7)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Fuel tank strap corroded.
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too high (1.8)
Brake load sensing valve linkage seized (3.6.E.3)
Play in near side rear axle bearing.
Play in steering rack inner joint(s)
Unable to check boot space fully as customers belongings in boot.
Fuel tank strap corroded.
Play in near side rear axle bearing.
Play in steering rack inner joint(s)
Unable to check boot space fully as customers belongings in boot.
Rear wiper blade rubber split.
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Lower Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Lower Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Rear wiper blade rubber split.
Offside Registration plate lamp not working (1.1.C.1d)
Rear fog lamp not working (1.3.2b)
Nearside Headlamp aim too high (1.8)
Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DE03 BME is a 2003 Peugeot 206 in Red with a 1,124cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 61.1%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying DE03 BME, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of DE03 BME?
You can check the full history of DE03 BME by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DE03 BME registered?
DE03 BME is a 2003 Peugeot 206, first registered on 23 June 2003.
Is DE03 BME safe to buy?
The MOT history for DE03 BME shows 18 tests with a 61.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DE03 BME have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DE03 BME. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.