2003 Toyota MR2

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

both rear inner sills corroded

Front all front suspension components have signs of corrosion

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear all rear suspensions components have signs of corrosion

Rear both rear disc guards heavily corroded but still secure

Front Brake hose ferrule excessively corroded both fronts @caliper heavily expanded / corroded (1.1.12 (f) (i))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Rear Lower Body panel corroded and likely to cause injury rear section of sill corroded / hole (6.2.1 (a) (i))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Brake disc in such a condition that it is seriously weakened both front (1.1.14 (a) (ii)) DANGEROUS

Front all front suspension components have signs of corrosion

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear all rear suspensions components have signs of corrosion

Rear both rear disc guards heavily corroded but still secure

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) DANGEROUS

Offside Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) DANGEROUS

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

engine covers fitted

undertrays fitted

Brake lever has insufficient reserve travel (1.1.2 (a))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

engine covers fitted

undertrays fitted

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

both front tyres cracking up

Rear Parking brake lever has no reserve travel (3.1.6b)

Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

offside front fog lamp not working

Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)