MOT Status
ExpiredMileage
64,140 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
both outer sills corroded
Nearside Front Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Headlamp aim too low (1.8)
Offside Front Headlamp aim too low (1.8)
Nearside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Outer Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Upper Shock absorber has a slightly worn bush (2.7.4)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Oil leak
Steering system has slight free play detected at steering wheel (2.2.A.1b)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
slight corrosion to o/s sill
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Windscreen wiper blade deteriorated (8.2.2)
Offside Windscreen wiper blade deteriorated (8.2.2)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DE03 HFP is a 2003 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 12 MOT tests with a personal pass rate of 75%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying DE03 HFP, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of DE03 HFP?
You can check the full history of DE03 HFP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DE03 HFP registered?
DE03 HFP is a 2003 Ford Ka, first registered on 10 April 2003.
Is DE03 HFP safe to buy?
The MOT history for DE03 HFP shows 12 tests with a 75% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DE03 HFP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DE03 HFP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.