2005 Chrysler Pt Cruiser

Nearside Front NOISE FROM FRONT SUSPENSION NO PLAY DETECTED AT TIME OF TEST

Offside Rear O/S/R AND CENTER SEAT BELTS NOT FULLY TESTED NO SEATS FITTED

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Lower Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front NOISE FROM FRONT SUSPENSION NO PLAY DETECTED AT TIME OF TEST

Offside Rear O/S/R AND CENTER SEAT BELTS NOT FULLY TESTED NO SEATS FITTED

Front Anti-roll bar pin or bush worn but not resulting in excessive movement Both - D bushes (5.3.4 (a) (i))

Nearside Rear Position lamp insecure Light unit loose (4.2.1 (c) (i))

Headlamp aim projected beam image is obviously incorrect Both - lenses cloudy (4.1.2 (c))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement Both - D bushes (5.3.4 (a) (i))

Nearside Rear Position lamp insecure Light unit loose (4.2.1 (c) (i))

Brake pipe corroded, covered in grease or other material BOTH REAR BRAKE PIPES AFTER FLEXI (1.1.11 (c))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Headlamp aim projected beam image is obviously incorrect BOTH HEADLIGHTS CLOUDY (4.1.2 (c))

Brake pipe corroded, covered in grease or other material BOTH REAR BRAKE PIPES AFTER FLEXI (1.1.11 (c))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Rear Brake pipe corroded, covered in grease or other material BOTH N/S AND O/S FROM FLEXY FORWARD (1.1.11 (c))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Exhaust system insecure TWO MOUNTING BRACKETS BROKEN ONE ON EXHAUST BOX AND THE OTHER ON EXHAUST PIPE (6.1.2 (a))

Nearside Rear Lower Anti-roll bar pin or bush excessively worn DROP LINK (5.3.4 (a) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt SPLIT (6.1.7 (g) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Rear Brake pipe corroded, covered in grease or other material BOTH N/S AND O/S FROM FLEXY FORWARD (1.1.11 (c))

Nearside Rear Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear NO SEAT FITTED IN O/S/R OR CENTER REAR UNABLE TO TEST SEAT BELTS

Front Headlamp aim projected beam image is obviously incorrect N/S AND O/S (4.1.2 (c))

Nearside Front Lower Suspension arm pin or bush excessively worn REAR BUSH TORN RESULTING IN EXCESSIVE UP AND DOWN MOVEMENT (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush excessively worn REAR BUSH TORN RESULTING IN EXCESSIVE UP AND DOWN MOVEMENT (5.3.4 (a) (i))

Offside Front Road wheel fixing missing (5.2.1 (a) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Direction indicator slightly discoloured N/S AND O/S (4.4.3 (a))

Nearside Rear Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear NO SEAT FITTED IN O/S/R OR CENTER REAR UNABLE TO TEST SEAT BELTS

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Headlamp aim projected beam image is obviously incorrect Both (4.1.2 (c))

Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Direction indicator slightly discoloured Both (4.4.3 (a))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Registration plate does not conform to the specified requirements Broken and covered with tape (0.1 (d))

Front Service brake lagging in operation (1.2.1 (d))

Front Direction indicator slightly discoloured Both (4.4.3 (a))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Headlamp aim so that beam "kick up" is not visible on the screen Both (4.1.2 (a))

Windscreen wiper does not clear the windscreen effectively Both (3.4 (b) (ii))

Front registration plate deteriorated (6.3.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

front number plate slightly damaged

o/s wiper blade split

Nearside Headlamp aim too low (1.8)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

front number plate slightly damaged

o/s wiper blade split

Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Torque/reaction arm has a slightly deteriorated rubber bush (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Bonded suspension unit deteriorated and cannot function as intended (2.4.F.3)

Nearside Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

front number plate damaged

Offside Stop lamp not working (1.2.1b)

Registration plate lamp not working (1.1.5c)

Nearside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced (2.4.F.2)

Offside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced (2.4.F.2)