2006 Kia Sorento

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened All (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Central Exhaust system insecure hanger detatched (6.1.2 (a))

Central Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Exhaust system insecure mounting broken (6.1.2 (a))

Nearside Front Suspension arm ball joint likely to become detached split pin missing (5.3.4 (a) (ii)) DANGEROUS

Offside Front Suspension arm ball joint likely to become detached split pin missing (5.3.4 (a) (ii)) DANGEROUS

Coolant leak ()

Front Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

o/s and n/s outer sills covered not allowing inspection

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

o/s and n/s outer sills covered not allowing inspection

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill (6.1.1 (c) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill (6.1.1 (c) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill (6.1.1 (c) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill (6.1.1 (c) (i))

Brake pipe corroded, covered in grease or other material Rear (1.1.11 (c))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill (6.1.1 (c) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill (6.1.1 (c) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Parking brake lever has little reserve travel (3.1.6b)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Parking brake lever has little reserve travel (3.1.6b)

hand brake slightly high

n/s/f tyre low on edges

Rear Brake pad(s) wearing thin (3.5.1g)

n/s/f tyre low outer edge

o/s/f tyre low inner edge

front brake pads wearing low

nearside front steering rack end has slight play

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Child seat fitted not allowing full inspection of adult belt

front disk liped pads 40% remain

o/s/r seat belt does not retract

rear pads and disk worn

Offside Rear Seat belt retracting mechanism defective (5.2.5b)

Child seat fitted not allowing full inspection of adult belt

Nail in nearside rear tyre

front disk liped pads 40% remain

rear pads and disk worn