2008 Seat Ibiza

Nearside Front Track rod end ball joint has slight play Inner Tie Rod (2.1.3 (b) (i))

Nearside Rear Stop lamp(s) lens defective which has no effect on emitted light (4.3.1 (b) (i))

Rear Exhaust Back Box Casing Corroded

Front Windscreen washer not working (3.5 (a))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Track rod end ball joint has slight play Inner Tie Rod (2.1.3 (b) (i))

Nearside Rear Stop lamp(s) lens defective which has no effect on emitted light (4.3.1 (b) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Exhaust Back Box Casing Corroded

Nearside Play in steering rack inner joint(s) slight play ()

Nearside Front Play in steering rack inner joint(s) ()

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Nail in tyre ()

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Play in steering rack inner joint(s) ()

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Nail in tyre ()

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect Shock shows signs of having a serious fluid leak, but has been wiped clean, also has very limited damping effect. (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Position lamp not working Does not illuminate simultaneously with other lamps. (4.2.1 (a))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect Shock shows signs of having a serious fluid leak, but has been wiped clean, also has very limited damping effect. (5.3.2 (b))

Offside Headlamp aim projected beam image is obviously incorrect Bulb incorrectly seated. (4.1.2 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Stop lamp not working (1.2.1b)

Offside Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Registration plate lamp not working (1.1.C.1d)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Offside Stop lamp not working (1.2.1b)

Registration plate lamp not working (1.1.C.1d)

both front tyres worn on inner edges

front pads getting low

both front tyres worn on inner edges

front pads getting low

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Stop lamp not working (1.2.1b)

Offside rear tyre tread starting to deteriorate

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside rear tyre tread starting to deteriorate

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)