2008 Seat Altea XL

Exhaust mounting defective Front mount split (6.1.2 (a))

Tailgate slightly loose Lock loose but tailgate remains secure (6.2.1 (a) (i))

Exhaust mounting defective Front mount split (6.1.2 (a))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Tailgate slightly loose Lock loose but tailgate remains secure (6.2.1 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Rear exhaust silencer corroded

Rear exhaust system corroded

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Rear exhaust system corroded

Nearside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Suspension arm ball joint dust cover severely deteriorated both front lower (5.3.4 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Suspension arm ball joint dust cover severely deteriorated both front lower (5.3.4 (b) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Exhaust: silencer , outer skin corroded

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Exhaust: silencer , outer skin corroded

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Nail in tyre ()

Engine cover and under trays fitted

Engine covers fitted unable to check some components

Nearside Rear Tyre perishing and showing signs of age

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre perishing and showing signs of age

Under trays and covers fitted unable to check some components

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Outer Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Rear Brake pad(s) wearing thin (3.5.1g)