2008 Honda S2000

Brake hose has slight corrosion to ferrule Front and rear on both sides (1.1.12 (f) (i))

Plastic under trays fitted obscuring some components

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Brake pipes above rear sub frame not visable

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Plastic under trays fitted obscuring some components

Rear Exhaust mounting defective On both silencers corroded (6.1.2 (a))

Sub-frame corroded but not seriously weakened Front and rear (5.3.3 (b) (i))

Electronic stability control warning lamp indicates a fault VSA light on (7.12 (e))

Registration plate does not conform to the specified requirements (0.1 (d))

Brake pipes above rear sub frame not visable

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Plastic under trays fitted obscuring some components

Rear Exhaust mounting defective Mountings on both silencers corroded (6.1.2 (a))

Sub-frame corroded but not seriously weakened Front and rear (5.3.3 (b) (i))

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement Rear bush (2.4.G.2)

Offside Front coil spring corroded (2.4.C.1b)

Plastic under trays fitted obscuring some components

Rear Sub-frame corroded but not seriously weakened Corroded (2.4.G.1)

Offside front brake excessively fluctuating (3.7.B.3)

Rear brake disc in such a condition that it is seriously weakened Corroded on outer face (brake pads working on approx 50% area) (3.5.1i)

Rear registration plate character(s) incorrectly spaced (6.3.4a)

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement Rear bush (2.4.G.2)

Offside Front coil spring corroded (2.4.C.1b)

Plastic under trays fitted obscuring some components

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Sub-frame corroded but not seriously weakened Corroded (2.4.G.1)

Front brake disc worn, pitted or scored, but not seriously weakened Corroded on edges (3.5.1i)

Rear Inner Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm Casing showing inner wall to tread area (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm Casing showing inner wall to tread area (4.1.E.1)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords Splits on inner wall (4.1.D.1a)

Front brake disc worn, pitted or scored, but not seriously weakened Corroded on edges (3.5.1i)

Nearside Rear Cracks on inner wall

Rear Inner Brake pad(s) wearing thin (3.5.1g)

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Tyre worn close to the legal limit (4.1.E.1)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Battery insecure (1.9.1)

Rear registration plate character(s) incorrectly spaced (6.3.4a)