2001 Nissan Cabstar

Brake load sensing valve stiff (1.1.17 (c) (i))

Chassis is starting to corrode

Fuel tank straps are corroded

Offside Front Suspension component pin or bush slightly worn Kingpin (5.3.4 (a) (i))

Offside Front Tyre slightly damaged/cracking or perishing Inner sidewall (5.2.3 (d) (ii))

Rear Exhaust has a minor leak of exhaust gases Exhaust system is corroded (6.1.2 (a))

Cab has been under sealed

Chassis is corroded

Exhaust has a minor leak of exhaust gases Exhaust system is corroded (6.1.2 (a))

Fuel tank straps are corroded

Nearside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

cab heavily under sealed

slight play in steering

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Brake hose slightly chafed (1.1.12 (b) (i))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Rear Hydraulic leak, but not excessive tipper motor (8.4.1 (a) (i))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Track rod end ball joint has excessive play from steering box to hub (2.1.3 (b) (i))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Brake hose slightly chafed (1.1.12 (b) (i))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Rear Inner Nail in tyre ()

Rear Hydraulic leak, but not excessive tipper motor (8.4.1 (a) (i))

Front exterior steps corroded

Fuel tank straps corroded

Offside rear bed/floor corroded

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced lower door frame (7.1.1 (a) (i))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Position lamp not working (4.2.1 (a))

Front exterior steps corroded

Fuel tank straps corroded

Offside rear bed/floor corroded

Front Anti-roll bar linkage has slight play in a pin/bush both (2.4.G.2)

front brake disc worn

nearside front pad warning sensor/wire broken

slight play in front wheel bearings

Parking brake: efficiency below requirements (3.7.B.7)

front brake discs worn

nearside front brake pad warning sensor/ wire broken

slight play in both front wheel bearings

chassis corroded

discs worn

slight play in the rear n/s link bar

both front king pins require greasing

Parking brake: efficiency below requirements (3.7.B.7)

both front king pins require greasing

Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Rear Exhaust system not adequately supported (7.1.1)

front brake pads appear low