2004 Audi Tt

Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Headlamp has a product on the light source so that the light output is severely reduced (1.7.5a)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Nearside Front Tyre has cut in side wall with no cords showing.

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Drive shaft which forms part of the suspension slightly corroded (2.4.G.4a)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Tyre flat.

Nearside Rear Tyre has cut in side wall with no cords showing.

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Offside Front Tyre has cut in side wall with no cords showing.

Offside Front Wiper jumping across the windscreen.

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Drive shaft which forms part of the suspension slightly corroded (2.4.G.4a)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Tyre has cut in side wall with no cords showing.

Offside Rear coil spring corroded (2.4.C.1b)

Oil leak ()

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

under tray missing screw causing movement but not insecure.

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Exhaust hanger broken

Nearside Headlamp aim too high (1.8)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp aim too high (1.8)

both front tyre wearing on inner edge close to limit

engine management light on

n/s/r brake binding slightly

n/s/r brake pad appears low

Nearside Front Anti-roll bar linkage has excessive play in a ball joint drop link (2.4.G.2)

Nearside Front Seat belt retracting mechanism defective (5.2.5b)

Offside Headlamp not working on dipped beam (1.7.5a)

both front tyre wearing on inner edge close to limit

engine management light on

n/s/r brake binding slightly

n/s/r brake pad appears low

Centre exhaust hanger bracket corroded/detached

Engine management warning lamp on

Front tyres wearing on inner edge

Heat sheild on catalytic convertor loose

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Centre exhaust hanger bracket corroded/detached

Engine management warning lamp on

Front tyres wearing on inner edge

Heat sheild on catalytic convertor loose

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Run flat tyres fitted to rear wheels with no tyre pressure monitoring system

Screw in offside rear tyre

Catalytic convertor heat sheild mounting hardware corroded

Engine management warning lamp on

Exhaust centre hanger bracket corroded/detached

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Catalytic convertor heat sheild mounting hardware corroded

Engine management warning lamp on

Exhaust centre hanger bracket corroded/detached

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too low and too far to the right. (1.8)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too low (1.8)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Headlamp aim too low (1.8)

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Tyre worn close to the legal limit (4.1.E.1)