2005 Honda Xr 125 L-5

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Rear reflector obviously incorrectly positioned (4.8.2 (a) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Rear reflector obviously incorrectly positioned (4.8.2 (a) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Suspension arm pin, bush or joint worn but not resulting in excessive movement slight play swingarm pivot (5.3.4 (a) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Exhaust has a minor leak of exhaust gases slight leak at manifold (6.1.2 (a))

Front Direction indicator slightly discoloured both front (4.4.3 (a))

Nearside Front Direction indicator insecure damaged (4.4.1 (c) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Wheel alignment slightly misaligned (2.4 (a))

Rear suspension bearing has slight free play swingarm pivot (2.4.A2a(i))

Rear wheel bearings have slight free play (2.4.A.2c)

Drive chain excessively loose (6.2.1d)

Exhaust excessively deteriorated holes in silencer (7.1.1a)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Front shock absorber seal failed and leaking oil both sides (2.3.3)

Headlamp aim headlamp deteriorated and function impaired headlight bulb not fitted correctly (1.2.3a)

Rear suspension bearing has slight free play swingarm bearings (2.4.A2a(i))

Rear wheel bearings have slight free play (2.4.A.2c)

Rear wheel bearings have slight free play (2.4.A.2c)

Clutch lever positioned so it cannot be readily operated. mounting bracket loose (6.2.1g)

Drive chain excessively tight (6.2.1d)

Drive chain worn to excess (6.2.1e)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front shock absorber seal failed and leaking oil both legs (2.3.3)

Handlebar handgrip not secure to handlebars. both loose (2.1.1c)

Horn not working (1.7.3a)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear reflector on motorcycle missing (1.4.1)

Rear suspension bush has excessive free play bottom of shock absorber (2.4.A2a(i))

Riders seat insecure offside bolt missing (6.2.1a)

Rear wheel bearings have slight free play (2.4.A.2c)

Front Brake lining(s) close to minimum limit (3.2.A1f(i))

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake disc(s) slightly pitted (3.2.A1l)

Headlamp masks/converters fitted

Headlamp aim beam image kick up to the offside (1.6)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Clutch lever bent (6.2.1g)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake disc(s) slightly pitted (3.2.A1l)

Offside Front shock absorber has light misting of stanchion (2.3.3)

gear selector lever insecure

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)