2007 Mercedes-benz Vito

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mount (5.3.6 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mount (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mount (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member . spring mount (5.3.6 (a) (i))

Oil leaking excessively from engine (8.4.1 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive subframe mount (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive both jacking points (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both jacking points (5.3.6 (a) (i))

Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both front jacking points (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both rear jacking points (5.3.6 (a) (i))

Tyre worn close to legal limit/worn on edge both front tyres (5.2.3 (e))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

n/s inner sill badly corroded

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

n/s inner sill badly corroded

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front inner sill hole not in a persrcribed area

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Rear Exhaust system insecure hanger snaped (6.1.2 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Front inner sill hole not in a persrcribed area

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Exhaust mounting defective (6.1.2 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Brake pipe corroded, covered in grease or other material front and rear pipes (1.1.11 (c))

Exhaust mounting defective (6.1.2 (a))

Nearside Front Service brake excessively binding (1.2.1 (f))

Offside Front Position lamp not working (4.2.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Brake pipe corroded, covered in grease or other material front and rear pipes (1.1.11 (c))

Exhaust mounting defective (6.1.2 (a))

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front passenger door cannot be opened from inside the vehicle (6.2.B.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Exhaust system not adequately supported (7.1.1)

Nearside Rear coil spring broken (2.4.C.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front splits In tread

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front passenger door cannot be opened from inside the vehicle (6.2.B.1b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front splits In tread

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

n/s rear tyre low on edges

o/s front tyre low on edges

Centre Exhaust system not adequately supported (7.1.1)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear coil spring broken (2.4.C.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

front tyres worn low on edges

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front front brake application uneven (3.7.B.2)