2013 Seat Toledo

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Stop lamp(s) emits other than a steady red light (4.3.3 (a) (ii))

Nearside Rear Stop lamp(s) lens defective such that the emitted light is adversely affected (4.3.1 (b) (ii))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Front Suspension arm ball joint likely to become detached Secure fixing missing (5.3.4 (a) (ii)) DANGEROUS

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Nail in tyre

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Stop lamp(s) lens defective which has no effect on emitted light (4.3.1 (b) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Windscreen wiper blade defective (3.4 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both front arm bushes perished (5.3.4 (a) (i))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Stop lamp(s) lens defective which has no effect on emitted light (4.3.1 (b) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Windscreen wiper blade defective (3.4 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both front arm bushes perished (5.3.4 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Rear Position lamp lens seriously defective (4.2.1 (b))

Offside Rear Track rod end ball joint has excessive play (2.1.3 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Inner Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Offside Rear Inner Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Exhaust silencer corroded

Suspension arm pin or bush worn but not resulting in excessive movement NSF - OSF (5.3.4 (a) (i))

Nearside Stop lamp(s) emits other than a steady red light (4.3.3 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear exhaust poor condition

Exhaust system insecure (6.1.2 (a))

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear exhaust poor condition

Exhaust system insecure Cat link pipe (6.1.2 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm 215/40/17 (5.2.3 (e)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear exhaust poor condition

Exhaust system insecure Cat link pipe (6.1.2 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm 215/40/17 (5.2.3 (e)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear exhaust poor condition

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Headlamp aim too low (4.1.2 (a))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Headlamp aim too low (4.1.2 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))