2003 Aprilia RS125

Horn not working (7.7 (a) (ii))

Front Direction indicator not working (4.4.1 (a) (ii))

Rear Direction indicator not working left/right indicator flashing together (4.4.1 (a) (ii))

Rear Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened worn (1.1.14 (a) (ii))

Nearside Indicator switch insecure spinning on handlebar (4.4.2 (a) (i))

Rear tyer fitted wrong way round

Rear Tyre fouling another component (5.2.3 (f))

Rear Tyre has a tear caused by separation or partial failure of its structure (5.2.3 (d) (i))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Brake lever slightly damaged (3.2.A1c)

Decelerometer brake test the less effective brake control does not achieve an efficiency of 25%. (3.3.E1b)

Front Brake component worn and seriously reduced in strength (3.2.A1)

Front wheel bearings are excessively rough (2.3.5b)

Horn control not functioning. (1.7.2b)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Footrest missing (6.2.1a)

Rear Brake lever slightly damaged (3.2.A1c)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Drive chain lightly rubbing (6.2.1d)

Exhaust noisy (7.1.2)

Nail in front tyre

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Steering movement slightly 'notchy' (2.2.1a)

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Position lamp switch insecure (1.1.4b)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Registration plate incorrect (6.3.1a)

Front Brake hose excessively chafed (3.2.B3a) DANGEROUS

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Front Front wheel bearings are excessively rough (2.3.5b) DANGEROUS

Rear shock absorber has inadequate damping effect. (2.4.A.3b) DANGEROUS

Rear suspension bush has slight free play (2.4.A2a(i))

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Front wheel bearings are slightly rough (2.3.5b)

Nearside Rear Footrest missing (6.2.1a)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Offside Handlebar mounting clamp bolt loose (2.1.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)