2003 Mercedes-benz Vito

Body has slight corrosion (6.1.B.2)

Brake load sensing valve linkage stiff (3.6.E.3)

Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Vehicle structure has slight corrosion (6.1.A.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

n/s/r shock absorber dust cover broke

rear brake fluctuating, but not excessively (3.7.B.3)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Horn sounds harsh or grating (1.6.2e)

Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Parking brake: efficiency below requirements (3.7.B.7)

Body has slight corrosion (6.1.B.2)

Brake load sensing valve linkage stiff (3.6.E.3)

Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Vehicle structure has slight corrosion (6.1.A.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

n/s/r shock absorber dust cover broke

rear brake fluctuating, but not excessively (3.7.B.3)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

front registration plate damaged

nearside and offside front to rear brake pipes coroding

nearside front brake pipe coroding

offside rear tyre worn on inner edge

rear brake discs coroding

offside rear tyre worn on inner edge

Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Rear Brake load sensing valve seized (3.6.E.3)

offside and nearside front brake pipes coroding

offside and nearside front to rear brake pipes coroding

offside rear tyre worn on inner edge

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pipe slightly corroded (3.6.B.2c)

Emissions not tested (7.0)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Registration plate lamp not working (1.1.5c)

Parking brake: efficiency below requirements (3.7.B.7)