2008 Toyota Aygo

Items removed from driver's view prior to test

corrosion to under body areas,suspension and braking component

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Items removed from driver's view prior to test

corrosion to under body areas,suspension and braking component

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Inner tread worn

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

corrosion to suspension components

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front exhaust mount insecure

corrosion to suspension components

travel in hand brake lever

Offside Rear cracks in tyre and deep cut in tread

travel in hand brake lever

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Offside Rear cracks in tyre and deep cut in tread

travel in hand brake lever

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear tyre badly cracked

Nearside rear brake binding (3.7.B.1)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Nearside Rear Nail in tyre

Offside Rear tyre badly cracked

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Stop lamp not working (1.2.1b)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)

cracks in o/s/r tyre

front tyres worn on inner tread

Nail in nearside rear tyre

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nail in nearside rear tyre

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nail in nearside front tyre

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

front brake discs badly corroeded