2008 Toyota Aygo

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Horn not working (7.7 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Rear Suspension arm corroded but not seriously weakened Axle beam (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension component corroded but not seriously weakened REAR AXLE BEAM (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive REAR CHASSIS O/S N/S (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive REAR INNER UNDER SILLS O/S N/S (5.3.6 (a) (i))

Emissions not tested BAD EXHAUST BLOW (8.2.1.2 (d))

Offside Headlamp aim too high (4.1.2 (a))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension component corroded but not seriously weakened REAR AXLE BEAM (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive REAR CHASSIS O/S N/S (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive REAR INNER UNDER SILLS O/S N/S (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front registration plate deteriorated but not likely to be misread (6.3.1d)

NSR tyre perished and wearing thin on outer edge

OSF tyre wearing thin on inner edge

Slight noise from OSR wheel bearing

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

inboard brake discs slightly corroded