2004 Audi A6

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Central Exhaust silencer slightly loose clamp corroded (8.1.1 (b) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))

Offside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear exhaust backboxes have soot around them but no sign of exhaust leak

vehicle fitted with undertrays not allowing full inspection

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Central Exhaust silencer slightly loose clamp corroded (8.1.1 (b) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))

Offside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear exhaust backboxes have soot around them but no sign of exhaust leak

vehicle fitted with undertrays not allowing full inspection

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge worn heavily on edge REPLACE ASAP!!! (5.2.3 (e))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Steering lock not functioning (7.3 (a))

eml light on

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Brake pipe excessively corroded at caliper (3.6.B.2c)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt front (2.4.G.2)

Offside Front Brake pipe slightly corroded @ caliper (3.6.B.2c)

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt front (2.4.G.2)

Offside Front Brake pipe slightly corroded @ caliper (3.6.B.2c)

Rear Body has a sharp edge caused by damage bumper (6.1.C.1)

Under-trays fitted obscuring some underside components

Nearside Headlamp aim too high (1.8)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure inner sidewall -225/45 zr18 95W (4.1.D.1b)

Offside Rear coil spring broken (2.4.C.1a)

Nearside Rear Tyre worn close to the legal limit approx 3mm @ 225/45 zr18 95W (4.1.E.1)

Undertrays fitted not allowing full inspection of underside components

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Nearside Headlamp aim too high (1.8)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Offside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Rear Brake pad(s) wearing thin (3.5.1g)

Under-trays fitted obscuring some underside components

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

engine oil low

zero emissions recorded

Front registration plate deteriorated (6.3.1d)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

zero emissions recorded