MOT Status
ExpiredMileage
135,767 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))
Coil spring corroded Both front (5.3.1 (b) (i))
Front subframe corroded.
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Outer sills corroded and holed.
Rear chassis rails corroding.
Front Brake pipe corroded, covered in grease or other material both (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge cracking on inside of tyre (5.2.3 (e))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush of arm (5.3.4 (a) (i))
Offside sill has corrosion
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Suspension arm attachment bracket/mounting insecure and impairing directional stability radius arm bush (5.3.3 (a) (ii)) DANGEROUS
Front Brake pipe corroded, covered in grease or other material both (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge cracking on inside of tyre (5.2.3 (e))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush of arm (5.3.4 (a) (i))
Offside sill has corrosion
Rear Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))
Nearside Front Tyre worn close to legal limit/worn on edge 2 1/2 mm (5.2.3 (e))
Offside Front Brake pipe corroded, covered in grease or other material into hose (1.1.11 (c))
Offside Front Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush of arm (5.3.4 (a) (i))
Offside Outer sill has corrosion
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Tyre worn close to legal limit/worn on edge 2 1/2 mm (5.2.3 (e))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Brake pipe corroded, covered in grease or other material into hose (1.1.11 (c))
Offside Front Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush of arm (5.3.4 (a) (i))
Offside Outer sill has corrosion
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive Outer sill corroded and holed. Inner sill looks structurally strong. (7.1.1 (a) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Tyre fouling a part of the vehicle Due to broken spring. (5.2.3 (f))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Engine management light on.
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive Outer sill corroded and holed. Inner sill looks structurally strong. (7.1.1 (a) (i))
Brake fluid reservoir cap loose.
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside outer sill corroded.
Emissions not tested (8.2.1.2 (d))
Nearside Rear Position lamp not working (4.2.1 (a))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Brake fluid reservoir cap loose.
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside outer sill corroded.
Nearside Rear Position lamp not working Rear position lamp not working (4.2.1 (a))
Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting OS/ Sill corrosion affecting the strength within 30cm of the seat belt mount (6.2.2 (d) (i))
Front Lower OSF and NSF Ball joint dust covers perishing
Front Oil leak but not excessive
Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Nearside Seat belt anchorage prescribed area is excessively corroded front and rear sill (5.2.6)
Covers Fitted
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Covers Fitted
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside front tyre deteriarated
Horn not working (1.6.2a)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside front tyre deteriarated
Both front brake discs in poor condition
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Horn noise level low
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Side repeater slightly discoloured (1.4.A.2f)
Play in an offside steering component
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Stop lamp not working (1.2.1b)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Unable to check in boot properly
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Brake hose twisted (found during steering lock to lock check) (2.2.D.2b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
DG03 LBZ is a 2003 Peugeot 206 in Silver with a 1,360cc petrol engine. This vehicle has been through 32 MOT tests with a personal pass rate of 53.1%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying DG03 LBZ, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of DG03 LBZ?
You can check the full history of DG03 LBZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was DG03 LBZ registered?
DG03 LBZ is a 2003 Peugeot 206, first registered on 18 March 2003.
Is DG03 LBZ safe to buy?
The MOT history for DG03 LBZ shows 32 tests with a 53.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does DG03 LBZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on DG03 LBZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.