2003 Mercedes-benz Vito

Sills and floorpan corroded

Position lamp not working NSF and OSF (4.2.1 (a) (ii))

Sills and floorpan corroded

Underside of the vehicle corroded but not excessive.

Offside Front Position lamp not working (4.2.1 (a) (ii))

Underside of the vehicle corroded but not excessive.

front and rear suspension components corroded

under body thickly under sealed

Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced below bumper (6.1.1 (c) (i))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arches (6.1.1 (c) (i))

Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

suspension components corroded front and back

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Underbody corrosion

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front inner sill corroded but not within a prescribed area

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear both rear shock absorbers corroded

vehicle has had extensive welding repairs carried out to its structure

Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.5 (b) (i))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Towbar excessively corroded within 30cm of towbar mounting cross member (6.1.6 (i) (i))

Offside Front Position lamp not working (4.2.1 (a))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Rear load sensing valve linkage seized

both front inner sills corroded but not in prescribed areas

Horn not working (1.6.2a)

Nearside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front front brake binding (3.7.B.1)

Nearside Rear Brake cable knotted broken in half (3.5.1b)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Bonnet retaining device ineffective (8.4.2)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Headlamp aim too high (1.8)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Headlamp aim too high (1.8)

Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

bike rack obscuring rear number plate

both rear outer sill excesively corroded noth in prescribed area

Nearside Front Headlamp not working on main beam (1.7.5a)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

both front outer sills excesively corroded not in prescribed area

rear number plate obscured by bike rack

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Offside Registration plate lamp not working (1.1.C.1d)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Side repeater incorrect colour (1.4.A.2f)

Brake load sensing valve linkage seized (3.6.E.3)

Brake performance not tested (3.7.A.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Inner Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Stop lamp not working (1.2.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

front brake application uneven (3.7.B.2)

front brakes release unevenly (3.7.B.4)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear brake disc excessively pitted (3.5.1h)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear brake disc excessively pitted (3.5.1h)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)