2003 Suzuki Swift

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced centre of sill (6.1.1 (c) (i))

Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Suspension component mounting prescribed area is excessively corroded floor repaired with card and silicone (2.4.A.3)

Front Brake hose ferrule excessively corroded BOTH (3.6.B.4e)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Rear Brake hose ferrule excessively corroded BOTH (3.6.B.4e)

Service brake: efficiency below requirements (3.7.B.7)

Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Outer Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Outer Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

o/s/ wiper blade split

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nail in nearside rear tyre

OS Wiper Blade

Offside Front Front position lamp(s) not working (1.1.A.3b)

both windscreen wipers split

Offside Front Brake pad(s) wearing thin (3.5.1g)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Offside Headlamp aim too low and too far to the right. (1.8)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear Exhaust has part of the system excessively deteriorated (7.1.1a)

Offside Front Brake pad(s) wearing thin (3.5.1g)